What is Optical Heart Rate Tracking? – Polar Malaysia
MYR
  • MYR
  • GBP
  • CAD
  • USD
  • AUD
  • EUR
  • SGD
WHAT IS OPTICAL HEART RATE TRACKING?

WHAT IS OPTICAL HEART RATE TRACKING?

What is optical heart rate tracking and how is it different from heart rate measured with a chest strap? What are the pros and cons of OHR (optical heart rate tracking) and how accurate is it? Get ready to dive into optical heart rate tracking. (If you’re familiar with the basics of heart rate and HR tracking, feel free to skip the first few sections.)

In the beginning there was the chest strap.

It was a major innovation of its time, designed to help athletes track their heart rate while exercising. Athletes would wet the strap or use a conductive gel, strap it around their chest, and enjoy the never-before-seen portability of chest-strap based HR.

It’s been 40 years since our first HR solutions but the heart rate sensor, chest strap, and GPS watch dynamic trio is still very much a valid combination for many situations. However, for some years you’ve also had the opportunity to use a sports watch with an optical heart rate sensor built-in. We’ve also introduced our first standalone optical heart rate sensor, Polar OH1, which you can wear on your arm.

WAYS TO MEASURE HEART RATE

There are different methods for measuring your heart rate, that is, how many times your heart beats per minute. They include, for example:

  • Using your fingers to count beats from an artery on your wrist or neck (the way some doctors do it on TV).
  • Measuring the electrical activity of the heart (ECG, the graph you see the doctor on TV looking at).
  • Measuring volumetric change with LEDs and photodiodes from the wrist or a finger, for example (PPG, the sensor with the green lights).

ECG VS PPG

ECG stands for electrocardiograph, a visual representation of the electric signals originating from the heart. As your heart beats, those electric signals carry through your body fluids onto your skin on which you can place electrodes that measure the changes. You need to wet your chest strap before using it or use a gel to make sure that the electrodes can pick up the electric signals.

Because ECG measures the electrical activity of the heart directly, it’s best to take the measurements from as close to the heart as possible. Hence, the chest strap.

PPG stands for photoplethysmogram or photoplethysmography which means optically measuring the volumetric changes of an organ. PPG is the signal that the optical heart rate solution measures, interprets, and uses to calculate your heart rate. You can – at least theoretically – measure the PPG signal anywhere from the body: from your finger, earlobe, temple, or wrist, for example.

PPG is the signal that the optical heart rate solution measures, interprets, and uses to calculate your heart rate

Polar_ECG_PPG

A CLOSER LOOK AT PHOTOPLETHYSMOGRAM

As said, photoplethysmogram stands for a) optically measuring the b) volumetric changes of an c) organ. Let’s break that sentence into its components:

a ) optically: PPG uses lights and sensors to make measurements

b) volumetric changes: PPG measures changes in volume, that is, how big or small something is.

c) organ: the organ we are talking about here isn’t just your heart but your whole cardiovascular system, especially the veins and capillaries under your skin.

In simpler terms, optical heart rate tracking is about using LEDs and a photodiode to measure the changes in the size of blood vessels under your skin.

Here’s a step-by-step breakdown of measuring heart rate from PPG pulses:

  1. An LED shines a constant light onto the skin. Some of its reflected and scattered back into the photodiode.
  2. Your heart beats and sends a pressure pulse through your circulatory system.
  3. The amount of light that reaches the photodiode changes due to the pressure pulse.
  4. The OHR solution tracks the changes and the time between pulses and determines your heart rate.

Now, you can modify this basic setup, for example, by altering the number and color of the LEDs, the intensity of the light, the LED placement, and the method of securing the LEDs and the photodiode near your skin. The basic method, however, remains the same.

SIDENOTE: IS 6 LEDS BETTER THAN 2 LEDS?

6 LEDs are three times better than 2 LEDs, right? Well, it’s not quite that simple.

As we’ve seen, the number of LEDs is just one piece of the puzzle. It is true that sometimes using a 6-LED solution gives us better results. Polar’s advantage is that we design and develop the complete OHR solution (the band and the form factor, the OHR electronics, the software, the algorithm…) which means we can tweak each individual component to get the best results. Sometimes this means 6 LEDs but not always.

CHOOSE A TOOL FOR THE JOB, NOT A JOB FOR THE TOOL

So, we started with the basic aim of measuring how fast your heart is pumping, also known as your heart rate. We noticed that there are different ways to reach this goal, one of which is optical heart rate tracking.

Now, all methods have pros and cons because they’re inherently different ways of measuring the same thing. And it’s not even necessarily a case of one being worse than the other: they’re just… different and the only way you can say one method is better than the other is to first consider the goal.

Here are a some goals you might have, in no particular order:

  • Tracking your heart rate at the gym
  • Not having to carry extra sensors while you travel
  • Wearing your sports watch on top of your sleeve (because perhaps like us, you live in Finland and it’s cold)
  • Tracking heart rate during a triathlon
  • Keeping an eye on your night-time heart rate
  • Tracking heart rate while playing volleyball
  • Putting on a sensor without lifting your shirt up at the fitness club
  • Tracking your heart rate 24/7
  • Tracking HRV to put into an HRV analysis app
  • Tracking heart rate during interval training

These are all valid goals and optical heart rate is a really good option for many of them.

PROS OF OPTICAL HEART RATE TRACKING

One of the biggest benefits of optical heart rate tracking is the ease of use. If you wear your sports watch all day and it has OHR, you’re always ready to track your heart rate, whether it’s during lunch-time yoga or cycling back home. Furthermore, if you want to track your heart rate round the clock, OHR is arguably the only viable option. Optical heart rate tracking also doesn’t require you to wet the chest strap or apply a gel.

One of the biggest benefits of optical heart rate tracking is the ease of use.

There are more options for sensor placement with OHR: on the wrist or on the upper or lower arm (with Polar OH1) for sports where the sensor placement might hinder your movement or performance. Examples that come to mind are bench pressing, volleyball, or racquet sports. In some situations, it’s better to track your heart rate from the arm (Polar OH1) rather than your wrist (wrist-based HR) because some movements or exercises put a strain on your wrist and tendons (such as pull-ups) which in turn can affect the quality of the signal. These physiological constraints can be solved by taking advantage of the versatility of optical heart rate tracking and the placement of the sensor.

Overall comfort is another big factor, while also being a very subjective topic. Some people actually enjoy the snug fit of the chest strap but many will appreciate the ease of just tightening the wristband and being ready to go.

CONS OF OPTICAL HEART RATE TRACKING

There are none.

Just kidding. Like we said in the beginning, what you want to do affects how you should do it.

Here’s a seemingly bold statement from the pioneers of wearable sports technology (it’s less bold when we dig deeper into it): optical heart rate tracking is more prone to errors than chest-strap based heart rate.

Before you call the press (or tweet them), here’s what that means: it’s easier to get erroneous measurements from an optical heart rate sensor than it is to get erroneous measurements from a chest strap HR sensor. There are ways you can cheat an optical heart rate sensor – for whatever reason – simply by constricting blood flow to the measurement location. And even if you’re not consciously trying to confuse the OHR sensor, there are occasions during which you might do so inadvertently (for example by wearing the OHR sports watch on the same hand that grips the tennis racket or wearing two fitness trackers side-by-side on the same wrist).

The key point here is that the sensor should be touching your skin and it shouldn’t be moving about much.

Another possible source of error is… as usual… ourselves. You can get bad results simply by wearing it in a suboptimal position, also known as wearing it wrong.

If you’re wearing a wrist-based optical heart rate tracker, like a sports watch, it should be worn snugly (not argh-my-hand-is-purple-snug) behind the wrist bone, towards your elbow (when we say behind the wrist bone, we don’t mean on the wristbone). See picture for placement.

polar_watch_how-to-wear

If you’re wearing the Polar OH1 heart rate armband, you should wear it on your lower or upper arm for the best results. The key point here is that the sensor should be touching your skin and it shouldn’t be moving about much.

polar_watch_oh1_how-to-wear

Besides this very human source of error, there are some technical limitations that are being solved as the technology advances, such as skin temperature affecting readings in the cold or at the beginning of a training session.

SIDENOTE: HOW TO WEAR A SENSOR FOR 24/7 HR TRACKING

Optical heart rate tracking is an excellent option for continuous heart rate tracking, also known as 24/7 HR. However, there are two aims here: making sure the sensor touches your skin and allowing your skin to breathe. If you wear the sports watch or fitness tracker too loose, you’ll introduce errors into the measurement and if you wear it too tight for too long, you’ll introduce discomfort into your life.

See more detailed instructions here..

OPTICAL HEART RATE TRACKING – HOW ACCURATE IS IT REALLY?

This is the interesting part: how accurate is optical heart rate compared to chest-strap based heart rate?

Based on our own validation studies, our optical heart rate readings are very similar to ECG-based readings in many of the most popular sports, mainly running and cycling. That said, it’s still true that if you want the universally most accurate heart rate tracking solution, reach for the chest strap.

One of the challenges of optical heart rate tracking is dealing with so-called motion artifacts. If you’re sitting still, the measurements contain very few motion artifacts but if you’re moving about, even minute changes in the position of the sensor will produce these artifacts.

How we design the form factor of the sensor or sports watch (weight, size…) is one part of the solution, while the way the Polar proprietary OHR algorithm interprets the raw data it gets from the sensor is another.

In many sports, we have now reached a level of precision so that the accuracy of optical heart rate tracking doesn’t have to be the deciding factor when you’re considering which solution is right for you.

THE BOTTOM LINE

Optical heart rate tracking is different from, but not inferior to chest-strap based heart rate measurement. They both have their advantages and disadvantages and we encourage you to use whichever method suits your goal for the day.

POLAR OH1 OPTICAL HEART RATE SENSOR IN A NUTSHELL

  • 6-LED optical heart rate sensor
  • Optimized for wear on lower or upper arm
  • Bluetooth Low Energy
  • Waterproof: 30 m
  • Updatable software
  • Internal memory for up to 200 h of HR training
  • Operation time: 12 h (USB rechargeable)
  • Works as both a standalone sensor and when connected to Polar products or a smartphone

WHO IS POLAR OH1 FOR?

If you’re looking for a simple and affordable way to track your heart rate, Polar OH1 is the right choice for you. It’s suitable for countless different sports, offering accurate, stable data in a remarkably comfortable and convenient form factor.

Polar OH1 works with Bluetooth-compatible Polar products, such as the Polar M460 GPS bike computer or Polar Vantage V GPS sports watch. So if you’re in search of an alternative for a chest strap or wrist-based heart rate monitoring, Polar OH1 is the answer to your problem. It also connects to smartphones and works with popular fitness apps.

Great news for those who prefer doing their training sessions without a phone or a watch but still want to capture their heart rate data: Polar OH1 also works as a standalone sensor. Just slip the armband on, start your workout, and transfer your heart rate data to Polar Flow afterward.

DESIGNED FOR COMFORT, ACCURACY, AND VERSATILITY

Polar OH1 is all these:

  • Accurate: it’s equipped with Polar’s proprietary optical heart rate solution for accurate heart rate tracking.
  • Versatile: Polar OH1 is a true heart rate monitoring multi-talent. You can use it for countless different sports, you can choose whether you want to wear it on the upper arm or forearm, and it works as a standalone sensor, with Bluetooth-compatible Polar products, Polar Beat – our free fitness and training app, and many other popular fitness apps.
  • Convenient: The Polar OH1 armband is easy to put on anytime, anywhere – there’s no need to moisten the strap or lift up your shirt. The long battery life (up to 12 hours) makes sure even those longer sessions get tracked.
  • Comfortable: The armband is made of a soft textile material. It’s machine-washable and can easily be adjusted to fit snugly and comfortably around the arm.

WHAT ABOUT POLAR H10? HOW DOES IT COMPARE?

Polar H10 is a chest strap heart rate sensor, so the most notable difference is the measuring method. Polar H10 measures the electrical activity of your heart (ECG), whereas Polar OH1, like other optical heart rate sensors, uses photoplethysmography (PPG). To put it simply, this means that it uses LED lights and a light-detector to measure the changes in the size of blood vessels and turns these measurements into heart rate readings.

Polar H10’s internal memory works with Polar Beat and can store one training session

There are some differences in the tech specs of Polar OH1 and Polar H10. For example, Polar H10’s internal memory works with Polar Beat and can store one training session, whereas Polar OH1 has space for up to 200 hours of training data. As for the battery life, Polar OH1 has a rechargeable battery that lasts up to 12 hours. Polar H10 includes a replaceable CR2025 battery that lasts up to 400 hours.

If you want to know more about the differences and similarities, read this.

HOW CAN YOU GET THE NEW POLAR OH1 HEART RATE SENSOR?

Polar OH1 is available in the official Polar webstore.

Loading...